The Intensive Dewatering Screen is uniquely designed with an up slope of 5° and either 1200 or 1800 RPM’s. This creates a substantial bed depth which both squeezes and packs the dewatered material. The percentage moisture content is generally ½ that of sand screws.
The CFS Dewatering Screen is designed and built for efficient dewatering of fine and coarse particles.
Dewatering screens are well proven in all types of construction and industrial sands. CFS Dewatering screens will handle more tonnage and outperform any dewatering screen on the market.
Dewatering Screen Proven Applications:
Golf Course
Asphalt
Concrete
Block
Foundry
Plaster
Mason
Silica
Glass
Frac
Filter
Manufactured
Dewater construction and industrial sands
Dewater fines recovery system
Dewater ahead of attrition scrubber
Fines removal -200 mesh
Soil remediation and washing
Dewatering of coal, sinter, slag, ores and ash
Dewatering of mineral slurries
Coarse or fine material washer
Dewatering Screen Advantages:
Dewatering Screens Allow:
Extremely dry discharge
Low percent moisture
Ship material the same or next day
Low horsepower requirements
Low maintenance and wear cost
Very high capacity per unit
Dewatering Screen Advantages:
Machine packs and squeezes material
Able to handle heavy loading
Excels on finer sands
Maximum recovery
Minimum waste
Actually more product vs weir type
Half the moisture of screws
Excellent under CFS System
Quicker winter drainage (20 Minutes vs. 2 Hours)
Able to stack more materials with same equipment (Up to 25% more)
Components and Parts
Dewatering screens are well proven in all types of construction and industrial sands. CFS Dewatering screens will handle more tonnage and outperform any dewatering screen on the market.
Features
High speed
High G force
Modular polyurethane flat deck
Variable angle up to 5 degrees
Adjustable dam
Heavy duty, stress relieved screen body and decking
Massive Tube Construction
Trunnion Spring Mounts
Adjustable Dam
High Speed Vibra Motors
High speed motors producing high G force with minimum horsepower. CFS uses three different motor speeds for different applications.
Heavy Duty Polyurethane Decking
Polyurethane decking, high durability, modular, low wear and low maintenance. CFS uses only 30mm decking with internal support reinforcing steel to support the heavy deck loading without dishing. CFS uses tounge and groove modular panels to maximize support steel life and ease the ability to change panels in the field.